My ticket arrived today!

The 2011 journey has begun.

During the incredibly hectic ticket purchase grand opening for Burning Man 2011, on January 13th 10am, I grabbed some screen shots while I waited for 3-4 hours in the que to purchase my ticket.

Here is where I jumped in line for my 2011 ticket. I managed to get my ticket in the first tier for $210.

The Yurt and shade structures are now for sale! Please scroll back in time to see all of the construction details.

The Blog is now repaired and working fine!

Sorry for the blog errors and the down time. A corruption of the WordPress database caused a loss of all photos. I am looking for the photos in my archives and moving them to a safer folder so that WordPress cannot delete them again.

Since the 12 x 20 shade structure went up very well, I think a larger one that is essentially flat with a little roof rise in it, will work to cover the yurt.

Adding many 20 foot long pvc pipes to the shade structure could make for great shade coverage of the Yurt and of our vehicles.

Here is Bill’s tent, my yurt and our potential shade layout for BM 2010.

The Yurt Rack is finally complete! Now I don’t need to buy a trailer and hitch for the wagon! That saved me some serious cash! It looks very solid. The side benefit is that there is a significant amount of storage space under the Yurt Rack for carrying shade structures.

These are the structural aluminum brackets that Bill gave me years ago. They sure came in handy. This bracket had to be sunken into the stud because all three brackets are not mounted in a straight line due to their placement on the roof by the factory. This mod allowed the stud to be aligned in a straight line.

The front bracket had to be sawed in half with my horizontal band saw since the 2 mounting studs were spaced much further apart from the factory. It did a great job. Don set this saw up for me years ago and it does such a nice job.

This rear bracket did not come with any slots for mounting so I just drilled a single hole. Under each bracket mount there is a 1/8″ thick reinforced rubber pad to help spread the load out on the roof.

I posted this idea here on the BM site.

I am seriously thinking about building a monkey hut to add to my yurt. It seems to me that the parachute effect of the wind getting under the hut could easily be minimized by not using one solid tarp, but a minimum of 3 tarps overlapped like very long roof shingles. So if a 20 x 10 tarp is normally used, maybe three 4 x 20 tarps stretched out length wise across the monkey hut frame, and over lapped by a foot or so. I know there are no 4 x 20 tarps, but I use that dimension to help draw the concept.

Imagine the wind blowing sideways across your camp….

1st idea: If the roof tarp goes on first, and the side tarps last, with the side tarps overlapping the roof, then air flow can exit going up through the roof from inside the hut if the edges of the sides are just a little loose. This would not allow so much lifting force. Airflow could not happen in the opposite direction so it would reduce dust ingress. But it would allow some rain to come in.

2nd idea: If the side tarps go on first, over lapped by the roof tarp, then the airflow could only move from outside the hut to the inside. I’m not sure that’s desirable. But it would keep the rain out. Hmmm. Maybe if the roof tarp was left looser with longer cords/bungees than the sides, or maybe only bungied to the end pvc loops, it would allow wind to escape by raising up some and letting the wind out. It would also keep the rain out. After thinking about it I like this idea best.

When the wind blows into the hut, it will have a route to escape through the two overlapping seams in the roof. But when wind tries to blow down onto the roof, the wind is blocked. The overlap of the 3 tarps provides a sort of one way valve for the air flow.

I thought of this because of street banners having so many crescent shaped cut outs made to allow the wind to blow through the banner, lowering the wind loading substantially. The problem with cutting crescents into a monkey hut tarp is that the wind and dust could blow into and out of the hut.

What do you think?

Next Page »