Last night until late and all day today I worked on the spot welder. Last night the ac wiring was routed and installed. Today was debug day. I found some issues that needed some help from Fritz. We exchanged a lot of emails. I suggested we open a Yahoo group to better support his efforts. Right now the welder won’t charge the main cap past 17-18v. It should hit 20v. Fritz suggested that D4 was bad. I replaced it to no avail. He suggested I check for solder issues. I re-soldered the whole board to no avail. That’s where the welder sits.

I made a list of other things that need to get done so the project doesn’t stall.