Tue 2 Oct 2007
I ordered some leds and swapped out the ones for the 3 dash indicators
our trucks have. They worked ok, but were very dim in the daylight. So
tonight I installed a set of brighter ones. Neither set was an exact
fit. They had to soldered in. As it turns out there is a wiring
harness that USE installed to make the stock Chevy dash work with the
Dolphin. So soldering to the flex circuit board is ok. Now they are
very bright, at least in my garage. Tomorrow I’ll see how they do in
daylight. The other reason for opening up the dash was because I
forgot to plug the antenna back into the radio a couple of weekends ago.
Leave a Reply
You must be logged in to post a comment.