Use truck #1 repair/upgrades

Check water pump brushes for wear.
Add 12v fuses to junction box.
Pull driveshaft and inspect for connector space.
Install Lithium BMS cable.
Upgrade heater to Kim Hotstart.
Top off redtop cells with water.
Order Kim Hotstart heater.
Add second set of gas struts.
Remove class 3 trailer hitch.
Repair Ready LED.

USE truck #2 repairs/upgrades

Polish paint
Remove Anderson connector and cables to pack.
Add 12v fuses to junction box.
Bad connections on Sanden box.
Add 6-32 standoff to main contactor for fan power.
Paint roll pan.
LRR tires.
Synthetic fluids for trans and rear end.
Zero toe alignment.
1998 S10 front air dam.
Battery box holes need helicoils.
Repair dash button cover.
Vacuum leak when in heat or vent positions (Bad vacuum switch).
Bad connection in Emeter circuit.
Incorrect heater wiring.
Blower never turns off.
Buy Factory shop manuals.
Charge Complete and fault lights burned out.
AC Not pumping freon.
Fan switch bad.
Cup holder damaged.
Grille Emblem missing.
Bed: Add tilt bed hardware.
Add gas struts to bed.
Add 2nd pair of gas struts to bed.
Heater: Pump ok, no heat. Replaced with Hotstart.
Remove rear Bumper.
Remove tool box.
Install Dolphin fuse holder.
Get 1 amp fuse for fuse holder.
Knife switch for aux battery.
Missing Antenna.
Install Fuel Door outlet.
Fuel door box.
Find rear valence (roll pan).